Question 1

What is Ampora?

Accepted Answer

Ampora is an AI-powered electrical calculator and reference app designed for electricians and electrical engineers. It includes professional tools like voltage drop calculator, wire sizing calculator, conduit fill calculator, arc flash analyzer, load calculation tools, and a comprehensive NEC code reference database.

Question 2

What electrical calculators does Ampora include?

Accepted Answer

Ampora includes six professional electrical calculators: Voltage Drop Calculator, Wire Sizing Calculator, Conduit Fill Calculator, Arc Flash Analyzer, Load Calculation Tool, and Motor Sizing Calculator. All calculations are NEC code-compliant.

Question 3

Does Ampora have an AI assistant for electrical questions?

Accepted Answer

Yes, Ampora features an advanced AI assistant trained on electrical engineering and NEC code. You can ask questions about electrical work, troubleshooting, code compliance, and get instant, accurate answers backed by NEC references.

Question 4

Is Ampora compliant with NEC electrical codes?

Accepted Answer

Yes, all Ampora calculators and references are based on NEC 2023 standards. The app includes a comprehensive NEC code database with search functionality and article references.

Question 5

Can Ampora analyze photos of electrical panels?

Accepted Answer

Yes, Ampora includes AI-powered photo analysis. Upload photos of electrical panels, wiring, and equipment to get intelligent analysis, safety recommendations, and troubleshooting guidance.

Question 6

How do I calculate voltage drop for electrical circuits?

Accepted Answer

Use Ampora's Voltage Drop Calculator to calculate voltage drop for single-phase and three-phase circuits. Enter your circuit voltage, current, wire gauge, and distance to get accurate NEC-compliant voltage drop calculations. The app uses the standard formula VD = (2 × K × I × D) / CM for single-phase and VD = (1.732 × K × I × D) / CM for three-phase circuits.

Question 7

What is the best app for electricians?

Accepted Answer

Ampora is designed specifically for electricians and electrical professionals. It combines AI assistance, professional calculators (voltage drop, wire sizing, conduit fill, arc flash), NEC code reference, photo analysis, and troubleshooting tools in one mobile app. It's free to download from the App Store.

Question 8

How do I size electrical wire using NEC tables?

Accepted Answer

Wire sizing requires checking NEC Table 310.16 for conductor ampacity based on insulation temperature rating (60°C, 75°C, or 90°C). Apply temperature correction factors if ambient temperature exceeds 30°C, and conduit fill derating if more than 3 current-carrying conductors are in a raceway. Ampora's Wire Sizing Calculator handles all these factors automatically.

Question 9

What is the NEC 3% voltage drop rule?

Accepted Answer

NEC 210.19(A) Informational Note recommends maximum 3% voltage drop for branch circuits and 5% total voltage drop (feeder + branch circuit combined). While these are recommendations, not requirements, many inspectors enforce them. For a 120V circuit, 3% equals 3.6V maximum drop.

Question 10

Where is GFCI protection required by NEC code?

Accepted Answer

Per NEC 210.8, GFCI protection is required for 125V-250V receptacles in bathrooms, kitchens (countertop and within 6 feet of sink), garages, outdoors, basements, crawl spaces, laundry areas, and within 6 feet of any sink. The NEC 2023 expanded requirements to include 250V receptacles in many locations.

Question 11

What is AFCI protection and where is it required?

Accepted Answer

Arc-Fault Circuit Interrupter (AFCI) protection detects dangerous arcing conditions that could cause fires. Per NEC 210.12, AFCI protection is required for 120V, 15A and 20A branch circuits in dwelling unit bedrooms, living rooms, kitchens, dining rooms, family rooms, hallways, closets, and similar rooms.

Question 12

How do I calculate conduit fill?

Accepted Answer

Conduit fill is calculated using NEC Chapter 9 tables. One conductor can fill 53% of conduit area, two conductors can fill 31%, and three or more can fill 40%. Use Ampora's Conduit Fill Calculator to automatically determine the correct conduit size based on conductor types, sizes, and quantities.

Question 13

Is Ampora free to use?

Accepted Answer

Yes, Ampora is free to download from the App Store. The app includes AI assistant, all six electrical calculators, NEC code reference, photo analysis, and troubleshooting tools. No credit card required to get started.

Question 14

Can I use Ampora offline on job sites?

Accepted Answer

Ampora's electrical calculators and reference formulas work offline. The AI assistant and photo analysis features require an internet connection to process queries through our AI system.

Question 15

What is arc flash analysis?

Accepted Answer

Arc flash analysis calculates incident energy levels and arc flash boundaries to determine required personal protective equipment (PPE) when working on energized electrical equipment. Ampora's Arc Flash Calculator follows IEEE 1584 and NFPA 70E standards to provide incident energy, working distance, and PPE category recommendations.

Question 16

How do I calculate electrical load for a service?

Accepted Answer

Residential service load calculations follow NEC Article 220. Start with 3 VA per square foot for general lighting, add small appliance circuits (1500 VA each), laundry circuit (1500 VA), and individual appliance loads. Apply demand factors per NEC Table 220.42 and 220.54. Ampora's Load Calculation tool automates this process.

Question 17

What are NEC receptacle spacing requirements?

Accepted Answer

Per NEC 210.52, no point along the floor line of any wall space can be more than 6 feet from a receptacle outlet. This means receptacles must be spaced no more than 12 feet apart. Any wall section 2 feet or wider requires a receptacle. Kitchen countertops require receptacles so no point is more than 24 inches from an outlet.

Question 18

Does Ampora work for commercial electricians?

Accepted Answer

Yes, Ampora is designed for both residential and commercial electricians. It includes commercial-focused tools like motor sizing calculator with full load current tables, three-phase voltage drop calculations, arc flash analysis, and NEC code reference covering commercial requirements.

Question 19

How do I prepare for an electrical inspection?

Accepted Answer

Before calling for inspection: verify permits are posted, all work is complete for that phase, boxes are accessible, panels are open, and work area is clean. Use Ampora's AI assistant to verify code compliance on specific questions like GFCI locations, AFCI requirements, box fill, and receptacle spacing before the inspector arrives.

Featured Articles

NEC Article 210 Explained: Complete Guide to Branch Circuits

How to Calculate Voltage Drop: Step-by-Step Guide for Electricians

Electrical Inspection Checklist: Pass Your Inspection First Time

More Articles

Wire Sizing Guide: How to Use NEC Ampacity Tables

AI Tools for Electricians: How AI is Changing the Electrical Trade

NEC Article 250 Explained: Complete Grounding and Bonding Guide

Conduit Fill Calculation Guide: NEC Chapter 9 Tables Explained

THHN vs THWN Wire: What's the Difference and When to Use Each

Electrical Panel Troubleshooting: Common Problems and Solutions

NEC Service Entrance Requirements: Complete Installation Guide

NEC Article 240: Overcurrent Protection Complete Guide

3-Phase Power Calculations: Complete Guide for Electricians

GFCI vs AFCI: Understanding the Differences and NEC Requirements

Box Fill Calculations: NEC Article 314 Complete Guide

Motor Circuit Protection & Sizing: NEC Article 430 Guide

Aluminum vs Copper Wiring: Pros, Cons, and NEC Requirements

Residential Load Calculations: NEC Article 220 Complete Guide

EV Charger Installation Guide: NEC Requirements for Electricians

Transformer Sizing Guide: kVA Calculations & NEC Requirements

Emergency & Standby Power Systems: NEC Articles 700, 701, 702 Guide

Bathroom Electrical Code Requirements: NEC GFCI, Circuit & Receptacle Rules

Underground Wiring Installation Guide: NEC Burial Depth & Methods

Electrical Symbols & Blueprint Reading: Complete Guide for Electricians

Power Factor Correction Basics: Understanding & Calculating Capacitor Sizing

Outdoor Receptacle Requirements NEC: GFCI, Covers & Placement Rules

NEC Article 500: Hazardous Locations Classification Guide

Electrical Grounding vs Bonding: Understanding the Difference

Solar PV Installation Guide: NEC Article 690 Requirements

Derating Factors for Conductor Ampacity: NEC 310.15 Guide

200 Amp Service Upgrade: Planning, NEC Requirements & Installation

Swimming Pool Electrical Requirements: NEC Article 680 Guide

Commercial Lighting Controls: NEC & Energy Code Requirements

Temporary Wiring for Construction Sites: NEC Article 590 Guide

Electrical Fault Current Calculations: Complete Guide

Kitchen Electrical Requirements: NEC Code Guide

Commercial Kitchen Electrical Requirements: NEC Installation Guide

Data Center Electrical Design: Power Distribution & Redundancy

Low Voltage Wiring Basics: Class 2 & 3 Circuits Guide

NFPA 70E Electrical Safety: Arc Flash PPE & Lockout/Tagout Guide

Receptacle Types & NEMA Configurations: Complete Guide

Browse by Topic

Get Electrical Guides in Your Pocket